Showing all 3 results

  • Sale!

    ABAC PRO A29B 50L CM2 AIR COMPRESSOR 230V 2HP

    £459.60 inc. VAT
    A29B PRO Range

    One Stage Belt Driven Compressors

    Features:

    • Highly Portable and robust unit
    • Belt driven
    • High air output at 110V
    • Large wheels and high handle for stability and convenience
    • Low speed pump, quite and durable
    • Fitted regulator/filter
    • Tough, Reliable and safe
    • Completely portable for ease of use

    The PRO Series is the range of products with which ABAC   places itself in the compressed air treatment market to satisfy all those who, by purchasing a compressor, demand quality, robustness, reliability and power.

    The PRO A29B 50 CM2 model is one of the most representative because it offers all these features and is highly appreciated both in the professional and semi-professional sectors: grinding, light chiselling, screwing, ratchet clamping will no longer be difficult to deal with.

    The A29B 50 CM2 compressor has belt drive and is oil lubricated, so that all moving parts are protected during operation; the single-stage pump unit has two cast iron cylinders , with a low rotation speed, which develops 1075 rpm , a feature thanks to which all the more or less important works that go on in time can be carried out and keep the appliance engaged with minors power swings. An engine that runs less quickly resists more over time and is increasingly reliable. 255
    liters per minute are aspirated ; next to the pump unit we find the wing manifold which facilitates air cooling.

    The electric motor from 2 Hp , powered at 230 V , is induction , ie without rubbing brushes that make it less noisy during use. Aesthetically the compressor A29B 50 CM2 is very accurate, the casing that surrounds the transmission, as well as protecting the mechanical parts and reduce the heating, becomes one with the supporting structure giving a very aggressive and modern effect.

    The 50-lt tank rests on two reinforced rubber feet and two sturdy rear wheels suitable for heavy-duty supports. Despite the weight of 49 kg, the displacement and transport are easy thanks to the front handle reinforced with molded rubber, practical and safe.

    The Compressor A29B 50 CM2 has the peculiarity of being able to be used simultaneously for two functions thanks to the two air outlets and when the pressure of the tank is no longer sufficient, a pressure switch allows to recharge the tank automatically.

    Standard equipment: pressure gauge display gauge in the tank, brass safety valve, knob pressure regulator, drain valve located in the lower part of the tank.  

    General characteristics

    Supply230V ~ 50 Hz
    Absorbed power1,500 W
    Rpm1075
    Motor power2 Hp
    Delivered pressureMAX 10 bar
    Tank50 liters
    CFM8.9
    Air intake255 l / minute
    Weight49 Kg
    dimensions870 x 370 – height 780 mm

    The A29B PRO range offers more user friendliness and lower operating temperatures.

    This is achieved all thanks to the several special product features focusing on the user comfort. They are a great match for more value seeking customers using their compressor for grinding and small hammering operations, but also ratcheting and wrenching

  • Sale!

    ABAC PRO A29B 50L CM3 AIR COMPRESSOR 230V 3HP

    £474.00 inc. VAT
    A29B PRO Range

    One Stage Belt Driven Compressors

    Features:

    • Highly Portable and robust unit
    • Belt driven
    • High air output at 110V
    • Large wheels and high handle for stability and convenience
    • Low speed pump, quite and durable
    • Fitted regulator/filter
    • Tough, Reliable and safe
    • Completely portable for ease of use

    The PRO Series is the range of products with which ABAC   places itself in the compressed air treatment market to satisfy all those who, by purchasing a compressor, demand quality, robustness, reliability and power.

    The PRO A29B 50 CM3 model is one of the most representative because it offers all these features and is highly appreciated both in the professional and semi-professional sectors: grinding, light chiselling, screwing, ratchet clamping will no longer be difficult to deal with.

    The A29B 50 CM3 compressor has belt drive and is oil lubricated, so that all moving parts are protected during operation; the single-stage pump unit has two cast iron cylinders , with a low rotation speed, which develops 1075 rpm , a feature thanks to which all the more or less important works that go on in time can be carried out and keep the appliance engaged with minors power swings. An engine that runs less quickly resists more over time and is increasingly reliable. 255
    liters per minute are aspirated ; next to the pump unit we find the wing manifold which facilitates air cooling.

    The electric motor from 3 Hp , powered at 230 V , is induction , ie without rubbing brushes that make it less noisy during use. Aesthetically the compressor A29B 50 CM3 is very accurate, the casing that surrounds the transmission, as well as protecting the mechanical parts and reduce the heating, becomes one with the supporting structure giving a very aggressive and modern effect.

    The 50-lt tank rests on two reinforced rubber feet and two sturdy rear wheels suitable for heavy-duty supports. Despite the weight of 49 kg, the displacement and transport are easy thanks to the front handle reinforced with molded rubber, practical and safe.

    The Compressor A29B 50 CM3 has the peculiarity of being able to be used simultaneously for two functions thanks to the two air outlets and when the pressure of the tank is no longer sufficient, a pressure switch allows to recharge the tank automatically.

    Standard equipment: pressure gauge display gauge in the tank, brass safety valve, knob pressure regulator, drain valve located in the lower part of the tank.  

    General characteristics

    Supply230V ~ 50 Hz
    Absorbed power1,500 W
    Rpm1075
    Motor power3 Hp
    Delivered pressureMAX 10 bar
    Tank50 liters
    CFM11.2
    Air intake320 l / minute
    Weight58 Kg
    dimensions940 x 410 – height 800 mm

    The A29B PRO range offers more user friendliness and lower operating temperatures.

    This is achieved all thanks to the several special product features focusing on the user comfort. They are a great match for more value seeking customers using their compressor for grinding and small hammering operations, but also ratcheting and wrenching

  • Sale!

    ABAC PRO A29B 90L CM3 AIR COMPRESSOR 230V 3HP

    £484.00 inc. VAT
    A29B PRO Range

    One Stage Belt Driven Compressors

    Features:

    • Highly Portable and robust unit
    • Belt driven
    • Large wheels and high handle for stability and convenience
    • Low speed pump, quite and durable
    • Fitted regulator/filter
    • Tough, Reliable and safe
    • Completely portable for ease of use

    Abac A29B 90 CM3 compressor 3 hp 7.9 CFM (FAD) 90 ltr receiver 230 volt 13 amp

    Abac lubricated compressors come with cast iron cylinders for long life, and the slow running pump unit gives low noise and long durability. Slow running belt drive for smooth efficient operation.

    Motor size (hp)3.0
    Voltage230 VAC 13 amp
    Displacement (CFM)11.2
    FAD (CFM)7.9
    Receiver (litres)90
    Pres. (bar / PSI)10 / 145
    Dimensions (mm)1010 x 415 x 900
    Weight (kg)58

    Each unit is supplied with a comprehensive instruction booklet, which illustrates the safe working practices appropriate to the use of compressed air. Each unit also boasts a 12 month warranty and Nationwide Back Up should you need it.
    At the heart of every ABAC reciprocating air compressor is a genuine ABAC pump unit. A world proven design offering superb quality and guaranteed reliability with the added assurance of the unrivalled back up and support provided by one of world’s largest manufacturers of air compressors.
    Superior valve and cylinder head design. Precision engineered for efficiency and reliability.
    Intercooler, after cooler, large flywheel and unique specially designed shroud ensure cooler operation minimizing wear to valves and cylinders whilst allowing easier removal of downstream condensation Combined cast iron and alloy cylinders and all cast iron cylinders fitted to larger units provide the benefits of long life with efficient cooling.
    Dual oil scraper piston rings, efficient air intake filtration and cooler operation provide better quality compressed air.
    Oversized roller bearings, high quality materials, robust proven design and solid construction provide durability.
    Oil level sight glass, easily accessible air filter and a separate valve plate arrangement allow simple maintenance.

    The PRO Series is the range of products with which ABAC   places itself in the compressed air treatment market to satisfy all those who, by purchasing a compressor, demand quality, robustness, reliability and power.

     

     

     

    Standard equipment: pressure gauge display gauge in the tank, brass safety valve, knob pressure regulator, drain valve located in the lower part of the tank.  

    General characteristics

    The A29B PRO range offers more user friendliness and lower operating temperatures.

    This is achieved all thanks to the several special product features focusing on the user comfort. They are a great match for more value seeking customers using their compressor for grinding and small hammering operations, but also ratcheting and wrenching

End of content

End of content